Энергетическое машиностроение и дополнительные услуги: ремонт турбин - ООО Инженерно-техническая фирма «Лентурборемонт»

Vortex ignition-burner for energy and water boilers

There are currently no heat-and-power engineering object that cannot receive permission to operate without a reliable certified ignition device. Of ignition in the thermal power is one of the bottlenecks in the operation of boilers, furnaces and other heating units. Statistics noted that 70% of accidents occur during the ignition and half of them occur because of low reliability and efficiency of ignition device. 
  Below are the summary of material drawn swirl ignition-burner developed at the Department of Automation and turbine PIMash. 
  Vortex ignition portable (hand) VIB device is designed for high-temperature-fired burner for ignition energy of any destination. 
  Vortex burners heating VGN-1 and VGN-2 are designed for operation of heating, firing, soldering, and to repair and use of technology. 
  The advantage of MAD and VIB is the use of low source of oxidizer and fuel gas (such as blowers, vacuum cleaners and domestic propane cylinder with a gearbox or a low-pressure natural gas). 
The work of MAD AND VIB based on a fundamentally new effect of burning fierce «tow» in the chamber and barrel. Changing the ratio of pressure (costs) of air and fuel gas get a sustained disruption of the torch burning with output up to a temperature of 900-1100 C and a length of 80 to 200 mm. Continuing support harnesses torch VIB resistant to disruption even in the clean cross-flow. VIB can be installed on virtually any object in any orientation to the main burner and flaming barrel can be as close to the injector burners. VIB has no restrictions on the dynamic load is not dependent on the parameters of the external flow of air and gas, can be operated in a discharge or excess pressure in the furnace, equipped with power plugs and the control of combustion, providing electrical charge on the glow-plugs, measuring the resistance between the electrodes in flame tow and the issuance of the necessary information to control the combustion and protection. 

   
  Technical data: 
VIB VGN-1 VGN-2 
Using the parameters of pressure 
- Air PB mm. 100 - 500 
- Combustible gas WG mm Art. 100 - 300 
  Propane (natural) 
- Ignition of any open-source 
  Flame 
- Temperature of the flame C 900-1100 
- Connection size flexible hose dy 20-25 
  nipple air and gas, mm flexible hose dy 6-10 
- M length of the burner 1, 2, 3 0,26 0,22 
- Height, width mm 50x50 110h45 90h25 
- Dimensions: 
  bag container to collect 
  length, height, width mm 500h300h300 
- Weight kg in the collection of MAD 12 0.9 0.35 
A detailed techno-commercial offer, you can receive, by sending an e-mail mail@lenturbo.ru or fax (812) 531-20-20
 


17.04.2009

The company has obtained the Certificate of compliance of System of a quality management (ISO 9001:2000)

15.01.2009
Lenturboremont” ltd secured the status of Technical agent of “Jakutskenergo”Corp
30.12.2008

“Lenturboremont” ltd. fulfilled preliminary specifications for works such as:
Change of К-200-130 turbounit parts and junctions, station №11 Verkhne-Tagilskaya ГРЭС

10.10.2008

The works have finished on the ПС 330 кВ КМСК

Ltd. “ETF"LENTURBOREMONT" is not responsible for the unauthorized use of any information contained in this site